top of page

PROPORTIONAL

Offering a solution for virtually any industrial equipment process control, the fully configurable and highly reliable Hetronic Proportional receivers are designed to operate with the highest levels of safety, dependability and efficiency. Hetronic Proportional receivers accommodate various control interfaces such as, Voltage Control/PWM proportional analog outputs (or combination of both), digital/analog inputs and outputs, CAN Bus, RS232 control cable and much more. Hetronic Proportional receivers are easily programmable through our H-Link software, include onboard LED diagnostics and can operate in various supplies and frequencies. Available either in pre-configured “off-the-shelf” or customized receiver solution to meet the customer’s specific requirements.

Hetronic Proportional Receivers

RX 14 PT-HL

Enclosed in a rugged and impact resistant HS-2 enclosure, the fully configurable RX 14 PT-HL receiver offers a combination of proportional and digital outputs. RX 14 PT-HL offers two (2) Main Contact relays, one (1) isolated proportional analog output with safety relay, twenty (20) switching relay digital outputs, four (4) on/off isolated DC/AC digital inputs and an RS232 control cable interface. The RX 14 PT-HL comes with a quick connect/disconnect 70 pol. connection and provides LED diagnostics for power/operation, transmission signal reception and main contact error. It can be supplied by either DC or AC power sources. Typical DC operating voltage range is 12VDC – 24VDC while AC operating voltage ranges from 48VAC – 240VAC.

Hetronic RX 14 HL
Weight

1740gr (3.8 lbs)

IP Rating
IP65
Dimensions

H: 205mm (8.1″)

W: 246mm (9.7″)

D: 90mm (3.5″)

Operating Temperature Range

-20C to +70C

(-4F to +158F)

Frequencies

4xxMHz, 8xxMHz, 9xxMHz and 2.4GHz

H-Link
H-Link Configurable

RX 28 PT-HL

The fully configurable RX 28 PT-HL proportional/digital receiver offers a step up in functional capability from the RX 14 PT-HL. RX 28 PT-HL offers two (2) Main Contact relays, one (1) isolated proportional analog output with safety relay, twenty-eight (28) switching relay digital outputs, four (4) on/off isolated DC/AC digital inputs and an RS232 control cable interface. The RX 28 PT-HL comes with a quick connect/disconnect 70 pol. connection and provides LED diagnostics for power/operation, transmission signal reception and main contact error. It can be supplied by either DC or AC power sources. Typical DC operating voltage range is 12VDC – 24VDC while AC operating voltage ranges from 48VAC – 240VAC.

Hetronic RX 22 HL
Weight

1900gr (4.2 lbs)

IP Rating
IP65
Dimensions

H: 205mm (8.1″)

W: 246mm (9.7″)

D: 90mm (3.5″)

Operating Temperature Range

-20C to +70C

(-4F to +158F)

Frequencies

4xxMHz, 8xxMHz, 9xxMHz and 2.4GHz

H-Link
H-Link Configurable
RX 28 PT-HL

Get with the experts to custom configure a solution for your application.

Configure it with us.

Engineered in Canada
Group of Hetronic Canada Radio Remote Controls
bottom of page